How to set up the Arlo Pro 3 Floodlight Camera | Range

News Releases

How to set up the Arlo Pro 3 Floodlight Camera

For the best results use the Arlo Secure app for Arlo camera setup.

To set up the Arlo Pro 3 Floodlight Camera:

  1. Launch the Arlo Secure app.
  2. Scroll down to the bottom of the screen and tap Add New Device.
  3. Tap Lights.
  4. Tap Pro 3 Floodlight Camera.
  5. Review the Meet your Arlo Floodlight screens, watch the installation video, and tap Continue.
  6. Select Connect without SmartHub (or select an Arlo SmartHub or Arlo Base Station if desired).
  7. If you selected Connect without SmartHub, tap Continue.
  8. Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
  9. Return to the Arlo Secure app and tap Continue.
  10. Enter your Wi-Fi SSID (network name) and password,
  11. Tap Continue.
  12. Insert the battery into the Arlo Floodlight and tap Continue.
  13. Keep the Arlo Floodlight separate from the housing and tap Continue.
  14. When the LED on the front of the Arlo Floodlight is blinking blue, tap Continue.
  15. Hold the QR code about four to six inches in front of your Arlo Floodlight Camera lens.
  16. When you hear a chime, tap Continue.
  17. Arlo will begin looking for your camera.
  18. After the camera is found, name your Arlo camera and tap Continue.
  19. Now that the Arlo Floodlight is paired with the Arlo Secure app, tap Continue to proceed with mounting the Arlo Floodlight.
  20. Place the Arlo Floodlight in an area with strong bandwidth and tap Continue.
  21. Make sure the Arlo Floodlight battery is charged and tap Continue.
  22. Review the screens for installing the wall plate, securing the housing, and adjusting the angle of the Arlo Floodlight, then click Continue.
  23. Check the position of your Arlo Floodlight and tap Continue.
  24. Follow the instructions for testing the light and tap Continue.
  25. Tap Finish.